200L Automatic Pharmaceutical / Food Powder Mixing Machine 200L 1.5KW VH-200 manufacturer from China Zhejiang Wisely Machinery Co., Ltd.

200L Automatic Pharmaceutical / Food Powder Mixing Machine 200L 1.5KW

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: VH-200

<span

200L Automatic Powder Mixing machine Machine with pharmaceutical / food powder

Description:

This machine adopts labor feeding and enclosed flapper valve for discharging. It will not produce powder dust, and it also will not produce mechanical compression and strong friction during mixing. So the material particles can remain intact.

The mixing barrel is made of stainless steel, which won’t pollute the material. Besides, this machine has timing device, which can control the mixing time of materials.

1. Easy operation; even mixing with vacuum charging equipment; equipped with compulsive blending setup
2. Adopt unbalanced canister body for excellent mixing effect
3. Easy install, discharge and cleaning
4. Stainless steel material, no dead angle

Applications:

This machine is applicable to mix dry granule material for pharmacy and other relative industries.It is widely used in the industries of pharmaceutical, chemical and foodstuff.

Specifications:

MODEL	VH-200
Volume(L)	200
Dia of barrel	300mm
Max chargin	55KG
Power	1.5KW
Agitation Speed(R/min)	12

Competitive Advantage:

The machine has the features of the special construction, high effect, no dead angle, uniform mixture.
The machine can also increase to blend the function compulsorily.
It can mix thin powder and more than two form powders including the materials that contain water.
It can get the good result of admixture (meaning that little admixture additives).

Operation Instruction

1. Place the machine on horizontal and solid ground, make sure the barrel can rotate freely.
2. Before starting, make sure that the inside material barrel and the driving wheel are clean and free of sundry.
3. Try running the machine before feeding material, check if it runs well.
4. Operate the machine according to the word instruction on the control panel.
5. When everything is fine, set the mixing time as desired, add material and begin to mix.

Attentions

1. The material added cannot exceed two thirds of the total barrel capacity, the mixing time is 4-10min.
2. Fill 20#machine oil into the reduction gearbox until the oil level reaches the worm wheel. Refill the oil every 3 months.
3. Periodically add high temperature resistance beef tallow to the rolling bearing, the ideal volume is one third of the chamber of the rolling bearing.

Maintenance

1. Adjust the V-belt when it is flabby or too tight to avoid sliding wear.
2. Keep the electric wire from moisture.